Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-27-2013, 11:53 AM   #1
Senior Member
 
69hilo2's Avatar
 
Join Date: Jun 2013
Location: near Tampa, Fla
Posts: 277
Default Help request on Wheels

Help request on Wheels not tires. Looking for info on the "steel" part, the wheel. The last owner replaced one tire and wheel. I don't believe that what he used is correct or safe. Any thoughts as to where I can get a correct replacement wheel for a 18ft single axle 1969 Traveler hilo. Look at the pic and notice the gap between the wheel and the axle. I'm not used to seeing a gap like this. I don't think it's safe, any thoughts on the safety issue??

As far as tires go, there is a lot of great info on this site and in the owners manual, just can't find anything on the wheels. Help please.

There are several Ford parts used in this hilo. Could the wheel be a Ford 5 lug wheel. Size can be taken off the "factory" one on the other side. So is the wheel Ford -- Chev -- special made for hilo or ??? Any info out there?

Later Tim
Attached Images
File Type: jpg 1.jpg (88.8 KB, 32 views)
__________________

69hilo2 is offline   Reply With Quote
Old 06-27-2013, 02:38 PM   #2
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

It looks like a trailer wheel to me. When I upsized my tires, I had to get new wheels (rims) that were 6" wide to fit the larger tires. (The OEM rims were 5"). I discovered there are slight variations in the stated size of the center hole, when looking at different rims. I suspect that one is just a bit big. The load is really carried by the lug bolts, so I doubt that it matters.

- Jack
__________________

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew
JackandJanet is offline   Reply With Quote
Old 06-27-2013, 02:46 PM   #3
Senior Member
 
Join Date: Dec 2012
Location: Upper left corner
Posts: 531
Default

I believe that trailer wheels are lug-centric. In other words, they are centered by the lug nuts. On this type of wheel there does not have to be a close fit between the hub and the wheel center.

Here's a link on wheel balancing that explains the wheel types:
Hub Centric Vs. Lug Centric
__________________
Raul

2408T
2010 Nissan Frontier, 4x4, Crew Cab
Norton Rider is offline   Reply With Quote
Old 06-27-2013, 11:23 PM   #4
Senior Member
 
69hilo2's Avatar
 
Join Date: Jun 2013
Location: near Tampa, Fla
Posts: 277
Default Info

Jack and Raul -- Thanks for the info and the nice link giving more info.
Myself I thought that it should always look like the following pic. Which I think is an original wheel on the axle. Notice how close the center hole is to the axle.
Trying to learn more.

Later Tim
Attached Images
File Type: jpg 6.jpg (80.4 KB, 21 views)
69hilo2 is offline   Reply With Quote
Old 06-28-2013, 07:54 AM   #5
Senior Member
 
Join Date: Dec 2012
Location: Upper left corner
Posts: 531
Default

Tim,

You may want to check a few things. Lug-centric steel wheels usually have coned or tapered lug nuts. See if yours has them. Also, you may want to remove an original wheel and the replacement and take a few measurements. Check the backspace, offset, width, etc: https://www.rsracing.com/tech-wheel.html. These dimensions should be the same on all wheels to avoid uneven tire wear and handling problems.
__________________
Raul

2408T
2010 Nissan Frontier, 4x4, Crew Cab
Norton Rider is offline   Reply With Quote
Old 06-28-2013, 06:57 PM   #6
Senior Member
 
69hilo2's Avatar
 
Join Date: Jun 2013
Location: near Tampa, Fla
Posts: 277
Default Tires And lift point help request.

Raul
Thank you for more info. All I can say at this point in time is that I have two mismatching tire wheel set ups.
Which I'll be working on this weekend. Might not fix it due to money but at least I hope to know more.

Where is the jack lift point on the 1969 Traveler 18ft single axle? See pic please. #1 or #2 or lift the body??

Later Tim & Nancy and dog that wants to go camping.
Attached Images
File Type: jpg 20.jpg (90.9 KB, 39 views)
File Type: jpg 21.jpg (97.8 KB, 34 views)
69hilo2 is offline   Reply With Quote
Old 06-28-2013, 07:01 PM   #7
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

I'd put it under #1 in the second photo. With springs, you can't really get to the frame, and I'd stay away from the axle.

- Jack
JackandJanet is offline   Reply With Quote
Old 06-28-2013, 07:29 PM   #8
Senior Member
 
Wrascal's Avatar
 
Join Date: Jun 2013
Location: Lower Alabama (LA)
Posts: 551
Default Looking at those pics

I too would choose placing it under the shackel that slaves the leaf springs. My reasoning would be that it'll shift the weight load over a larger area.
__________________
2014 Ford F250 6.7 PS
formerly a HiLo TD2401
now an 08 Jayco Eagle
Wrascal is offline   Reply With Quote
Old 06-28-2013, 07:34 PM   #9
Senior Member
 
Join Date: Dec 2012
Location: Upper left corner
Posts: 531
Default

Ditto on #1.
__________________
Raul

2408T
2010 Nissan Frontier, 4x4, Crew Cab
Norton Rider is offline   Reply With Quote
Old 07-05-2013, 03:13 PM   #10
Member
 
Join Date: May 2010
Location: rio grande valley, TX
Posts: 44
Default Wheels and Jacking

Here is my 2 cents. Hi-Lo tires have very close clearance with the trailer body and wheel well. I have had instances where I had to "jockey" the trailer up and down to get a tire on and off. In general I try to jack up under the frame somewhere letting the wheel sag a little for increased clearance. Of course my 17ft 2003 unit has the torsion type axles but it still is valid that clearances are close and you have to do some "fiddling" to get the tire on and off.

Great thing about Ho-Lo' is they are all different!
edward lansing is offline   Reply With Quote
Old 07-05-2013, 06:21 PM   #11
Senior Member
 
69hilo2's Avatar
 
Join Date: Jun 2013
Location: near Tampa, Fla
Posts: 277
Default Axle sag

Axle sag is what worked for we the last wheel that I took off.

edward lansing
Thanks for your input on this.

About as many folks have ideas on this as to the amount of different style hilo's.

Later Tim & Nancy
69hilo2 is offline   Reply With Quote
Old 07-08-2013, 05:09 PM   #12
Member
 
Brad Moss's Avatar
 
Join Date: Mar 2012
Posts: 27
Default Wheels

Just as a wheel supplier suggestion. etrailer.com was where I recently ordered boat trailer tires and wheels. Very helpful folks with lots of good info on web site. They were great to do business with.
Brad Moss
Brad Moss is offline   Reply With Quote
Old 07-08-2013, 05:33 PM   #13
Senior Member
 
69hilo2's Avatar
 
Join Date: Jun 2013
Location: near Tampa, Fla
Posts: 277
Default tires

Brad
Thanks for that input

Later Tim & Nancy
69hilo2 is offline   Reply With Quote
Old 10-17-2013, 10:58 PM   #14
Member
 
Join Date: Feb 2013
Location: Blacksburg, Virginia
Posts: 75
Default Wheel space

I just saw your post and I have just started painting my existing rims and realized that on my 2705 there is a coverthat fills in that hole and covers the end of the axle and the grease cap. It is just cosmetic but your space would be used. Just a thought!! Joe
__________________

JoeJones is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Hi-Lo Trailers Worldwide or any of its affiliates. This is an independent, unofficial site.


All times are GMT -5. The time now is 05:56 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
HiLoTrailerForum.com Copyright 2010
×