Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Electrical Systems, Charging and Solar Electrical components and wiring, batteries, charging systems, generators and solar topics.
Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-07-2011, 12:26 PM   #1
Senior Member
 
cptmoney's Avatar
 
Join Date: Apr 2011
Location: The WILD West!
Posts: 115
Default Monitor Panel questions

the monitor panel on my '94 Funlite is in a funky state. Hoping for some help on this one...

When I press the "test" button, I get the same response almost every time: all holding tanks (fresh, black, grey) show 50% capacity, and the battery shows low.

First off, the battery is new and fully charged, so I know that's incorrect. Additionally, I have seen the fresh water indicator show "full" after filling the tank - other than those two things, that's the extent of my knowledge of the system.

I've popped the panel off, hoping to see a loose wire or something obvious, but don't see anything.

My next step will be to crawl under the trailer and look for signs of loose wiring - but am wondering if I should be testing something specific.

Anyone have any pointers on this one?
__________________

cptmoney is offline   Reply With Quote
Old 07-07-2011, 01:12 PM   #2
Senior Member
 
PopRichie77's Avatar
 
Join Date: Aug 2010
Location: Quakertown, PA
Posts: 1,074
Send a message via AIM to PopRichie77
Default

Check the wire terminals in the battery box, this is a high corrosion area on a HI-LO. Look for bluish green where the wire is crimped onto the terminal. On my 95 I finally got tired of chasing bad connections, I removed and replaced every terminal in the battery box, also cleaned and soldered every one, I also soldered the terminals in the external lights, no more problems.
Check all grounds they are subject to the same problem.
I soldered every terminal as soon as I got my 2009 home.
__________________

__________________
Rich
------------------------------------
(215TL) - 1995 21' TowLite
(2209T) - 2009 22' TowLite
(2510 ) - 2010 25'
PopRichie77 is offline   Reply With Quote
Old 07-07-2011, 01:32 PM   #3
Senior Member
 
cptmoney's Avatar
 
Join Date: Apr 2011
Location: The WILD West!
Posts: 115
Default

Will do, PopRichie77 - I'll check it out pronto.

I'm guessing it would be most prudent to disconnect all power, both 110 as well as the battery, right? That's the way I'll play it, just to be safe.

I can see the wire leads hit the holding tanks at the rear (the black and grey). It LOOKS like it's hot coming into the top pole, is that right?

I'll go snap a quick pic and get right back here...
cptmoney is offline   Reply With Quote
Old 07-07-2011, 02:18 PM   #4
Senior Member
 
cptmoney's Avatar
 
Join Date: Apr 2011
Location: The WILD West!
Posts: 115
Default

Here's what I'm seeing...

First the panel and what comes up, regardless of true status.

Second and third pics are the wires leading to the actual float monitor in the black tank; from what I can tell, the red wire is hot, and from there the power heads to the highest pole (via orange wire) on the float gauge. Does that sound correct?

Looks like hot comes in as red, then up to orange, green in the middle, and yellow on the bottom pole. Anyone ever seen any of this before?



cptmoney is offline   Reply With Quote
Old 07-07-2011, 02:48 PM   #5
Senior Member
 
PopRichie77's Avatar
 
Join Date: Aug 2010
Location: Quakertown, PA
Posts: 1,074
Send a message via AIM to PopRichie77
Default

There are 3 sensors in each tank, none are what you call hot, assuming you mean 12 volts plus, there is no float. One is for each 1/3, 2/3 and full. You either have a bad ground at the panel or the 12 volt plus is low due to a corroded terminal.
The sensors on the black and gray water tanks are known not to work correctly. The second trip that I took on my 2009 the black water tank went to full and stayed there. There are replacements that people say work.
Order Horst Miracle Probes - Buy Horst Miracle Probes here
__________________
Rich
------------------------------------
(215TL) - 1995 21' TowLite
(2209T) - 2009 22' TowLite
(2510 ) - 2010 25'
PopRichie77 is offline   Reply With Quote
Old 07-07-2011, 03:16 PM   #6
Senior Member
 
cptmoney's Avatar
 
Join Date: Apr 2011
Location: The WILD West!
Posts: 115
Default

Hey PopRichie77 -

I have verified that all the battery box terminals are in good shape. I addressed each one to ensure that the connections were tight and functioning as they should be. I THINK that the connections are in good shape - again, THINK. I'll verify that there's a great ground connection (at the panel as well as in the battery box) and move forward from there.

Can/should I pop out each individual sensor, clean them, and reinstall? Is that a bit overkill? Especially if they're known to go bad so quickly?

Perhaps I should just make that investment of new probes and get it over with, huh?
cptmoney is offline   Reply With Quote
Old 07-07-2011, 03:24 PM   #7
Senior Member
 
cptmoney's Avatar
 
Join Date: Apr 2011
Location: The WILD West!
Posts: 115
Default

With my battery levels reading incorrectly, doesn't that push the "bad ground" idea to the front of the pack?

I just thought of that. Must be where it's faulting, as I KNOW the battery is good. I'm going to check it out now...
cptmoney is offline   Reply With Quote
Old 07-07-2011, 07:42 PM   #8
sam
Senior Member
 
Join Date: Mar 2010
Location: Niagara Falls,NY
Posts: 4,051
Default Monitor panel

Our monitor panel never worked correctly when we got the HiLo 10 yrs ago. Our dealer couldn'tfix it. We tried putting in a cleaning product that didn't work either. Our battery voltage lt. works. Not a high priority to replace. As you useyour HiLo you will have an idea of when your grey and black water tanks are full. We try to use the campground for restrooms and showers. Dishes are washed in a pan at the picnic table and water dumped outside. One thing I do is cook as much ahead of time as possible and freeze refrigate. Use paper products the can go in the campfire. If need be you can purchase a "Blue/Gray tank" to empty as needed. Go camping and see how you do with your holding tanks/capacity. Our rule is to only use the toilet in the middle of the night or when it is raining "cats and dogs".With three people we have to empty after a week. Consereve conserve.
sam is offline   Reply With Quote
Old 07-08-2011, 08:47 AM   #9
Senior Member
 
sting32's Avatar
 
Join Date: Aug 2010
Location: Salina, KS
Posts: 256
Send a message via Yahoo to sting32
Default

There is a problem with ground somewhere, IMHO, maybe a staple or screw or some add on from previous owner has nicked the wires somewhere?

Another possibility is someone plugged into 220v instead of 30AMP 120 volt somewhere and really messed stuff up in the camper! Like burned out the panel, and other things. Ive seen and read it happens a lot.

__________________________________________________ _____

To all, about panels and the sensors/plugs in tank.

the sensors use 4 plugs in tank, bottom is ground or common, the next 3 cause 1/3 2/3 full readings.

Now for those that say panel never worked fron new, A factory employee could put the wrong wire on the wrong plug, say he accidently put the full wire, on the second plug from bottom. the plug more or less senses the resistance of current (like an Ohm meter would).

When water is not up to the plug, it has infinite resistance, no current can flow. when covered with water, there is slightly less than infinite, which signals the panel to light lights according to what wire is seeing less than infinite resistance. so if FULL wire was on nex to very bottom plug, as soon as water hits it (aka is up and above the level to touch it), I am positive it would light the full light. Factory doesent usually fill tanks to test, if lights on panel work on "test" they write down it worked. Hilo could been different, I dont know.

I used to install these at Eldorado campers back in the late 80's. it is more or less freehand... Just so ya know, as they went through assembly builing, ya might guess that the tanks were already in camper. Installer went under camper with drill and plugs, and the electricians had left the 4 leads to where you could connect them. I would carefully try to eyeball were to drill the holes, so tank readings would make sense, some tanks though, were wierd shaped and mostly the full was usually set with a little bit below full, that way you didnt read "full" at what I would call over FULL, or too late.

I dont know if everyone that installed tanks did it this way. I did that on my own, more or less because the guy who showed me also thought it made more sense, and would allow an unlevel parking still reach full indicator more likely...

This is an oversimplified explanation as I understood how the panel works...
__________________
From Kansas: 29ft '95 5th, converted to toybox in rear, by Hilo. Pics soon, Some Here.
sting32 is offline   Reply With Quote
Old 07-08-2011, 09:00 AM   #10
Senior Member
 
cptmoney's Avatar
 
Join Date: Apr 2011
Location: The WILD West!
Posts: 115
Default

Thanks, sting32 - I appreciate your description.

How would you go about verifying that the ground is good?

In particular, I can only see inside the little 2" X 3" area behind the panel once I've popped it out. How do I access all the rest of the wiring that's tucked back in behind the frig?

What you're describing makes sense to me; if I KNOW that the battery is good, verified by a digital voltmeter, how do I get the panel to reflect the same? Some current is making it to the panel - but it's an incorrect measurement.

Do the monitor panels ever "go bad"? Like other small circuit boards are known to do? Similar to those found in hot tubs, home stereos, etc...? Could I just need a new monitor panel? And if so, where do I find one? How do I test the one that I have now? I'm a complete rookie when it comes to circuit boards like this. Not even sure where to begin.
cptmoney is offline   Reply With Quote
Old 07-08-2011, 10:12 AM   #11
Senior Member
 
PopRichie77's Avatar
 
Join Date: Aug 2010
Location: Quakertown, PA
Posts: 1,074
Send a message via AIM to PopRichie77
Default

Do you know someone that knows how to use a multimeter and trace out DC circuits, if so you should ask for help, as you might cause more problems than there is already. I repaired TVs and radios a long time ago and the one thing that I hated was to repair one that another shop had tried to repair first, as you first had to fix what they screwed up before you could find the original problem. Just making a point.
It's very easy to touch 2 terminals with the meter probe at the same time and short something else out.
__________________
Rich
------------------------------------
(215TL) - 1995 21' TowLite
(2209T) - 2009 22' TowLite
(2510 ) - 2010 25'
PopRichie77 is offline   Reply With Quote
Old 07-08-2011, 04:57 PM   #12
Senior Member
 
RCREYES's Avatar
 
Join Date: Mar 2010
Location: Far West Texas
Posts: 1,364
Send a message via Yahoo to RCREYES
Default

Quote:
Originally Posted by cptmoney View Post
Thanks, sting32 - I appreciate your description.

How would you go about verifying that the ground is good?

In particular, I can only see inside the little 2" X 3" area behind the panel once I've popped it out. How do I access all the rest of the wiring that's tucked back in behind the frig?

What you're describing makes sense to me; if I KNOW that the battery is good, verified by a digital voltmeter, how do I get the panel to reflect the same? Some current is making it to the panel - but it's an incorrect measurement.

Do the monitor panels ever "go bad"? Like other small circuit boards are known to do? Similar to those found in hot tubs, home stereos, etc...? Could I just need a new monitor panel? And if so, where do I find one? How do I test the one that I have now? I'm a complete rookie when it comes to circuit boards like this. Not even sure where to begin.
A good ground should be no more than 0.3 ohms or less.
__________________
"Ruben"
2404T, 2003 2500HD 4X4 GMC Sierra SLT Crew Cab w/Astro camper shell and 2003 Chevy Tahoe LE 4X2
Far West Texas
RCREYES is offline   Reply With Quote
Old 07-08-2011, 07:26 PM   #13
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

Quote:
Originally Posted by RCREYES View Post
A good ground should be no more than 0.3 ohms or less.
And, a fully charged battery will read in the 12.6-12.7 V range. You should see that same voltage on the back of the panel at the input to the battery "meter" if the wiring is good. If it's lower, you've got a poor ground or resistance somewhere in that circuit, which could cause all the symptoms you have.

To check for resistance, disconnect the battery and apply an ohmmeter to the battery end and the panel end of both leads. You should see the very low reading that RCREYES gave you if these circuits are good. (Of course, you are likely going to have to use a jumper wire to reach both ends.)

- Jack
__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew
JackandJanet is online now   Reply With Quote
Old 07-10-2011, 02:59 PM   #14
Senior Member
 
Join Date: May 2010
Location: Ohio North Coast
Posts: 850
Post

cptmoney,

I had a similar problem with my panel and discovered the ground wire from the monitor panel came loose. I was getting all kinds of weird readings. My ground wire was screwed into the metal frame work of the bottom half. The capscrew holding the wire had vibrated loose and fell out. I reattached the wire with a larger screw and put a dab of silicone sealer on the head to prevent it from happening again. I had to remove the upper metal fridge vent to get access to it from the outside.

Bob
__________________
2014 FR Heritage Glen 282RK
2013 F250 HD 6.7L Diesel
Formerly Owned: 1995 22D Fun Chaser & 2901L Classic
retiredcamper47 is offline   Reply With Quote
Old 10-25-2017, 01:26 PM   #15
Senior Member
 
Join Date: Oct 2017
Location: cobbo
Posts: 239
Default

Could anyone provide a wiring diagram, or describe it in words?
A tire blew out a lot of wiring, and I dont want to take the shower and fridge all apart to see what i need to see to figure it out.
Where does the monitor get 12+? and what color wire?
How many wires to each tank?
How are they wired?
for example, I figured out that the black wire is a sort of ground to the bottom of the tank, then the gray, but these are the only colors I see. Seems there should be two more wires since it needs them for ground, 1/3, 2/3 and 3/3 full.
I can see where there are several wires going into a small plastic U-shaped thing that hangs under the tanks.
How does the monitor come off the wall? It seems to be on there pretty good. Do I pull harder, or will it break?

__________________
1997 22L
Renovation complete!
marininn is offline   Reply With Quote
Old 10-26-2017, 08:09 AM   #16
Site Team
 
Treeclimber's Avatar
 
Join Date: Feb 2015
Location: SWFL Bonita Springs/Andrews, NC
Posts: 1,264
Default

A little background. I, too have tank monitoring problems. My fresh tank is empty, but reads 1/3, grey reads 2/3 when empty and black reads correct.
On MY TANKS, white goes to the bottom lug, yellow is 2nd lug (1/3) green is third lug (2/3) and the upper lug is orange (full).
Two brown wires (power?) are spliced with the above colors (1 each) for each tank along with a grey wire (function unknown to me). The reason I've done nothing with this monitor (except I changed the tank lugs, simple) is what your talking about, I can't figure out how to remove the monitor from the wall to change the wire harness and I don't want to remove the refer.
This is on a 2703, not sure if it's the same as yours, but I'm pretty sure it is. I also think that power to the pump and power to the tanks ARE different sources. I hope this helps.
Tree
__________________
Treeclimber
2703 Tow Lite
2002 Escalade
Bonita Springs, Fl. &
Andrews, NC
Treeclimber is offline   Reply With Quote
Old 10-26-2017, 08:31 AM   #17
Site Team
 
Treeclimber's Avatar
 
Join Date: Feb 2015
Location: SWFL Bonita Springs/Andrews, NC
Posts: 1,264
Default

marininn, follow up, Amazon has a complete system for $35.
"KIB M21VW micro monitor system", looks just like mine also has h2o pump switch and battery. My problem is when I remove the panel screws and take the panel off the wall, the wires won't move. I think they were installed then spray foam was applied thus sealing them in place, otherwise I'd just replace the entire system. I've also heard of a wireless system, but have never heard any feedback on reliability.
Tree
__________________
Treeclimber
2703 Tow Lite
2002 Escalade
Bonita Springs, Fl. &
Andrews, NC
Treeclimber is offline   Reply With Quote
Old 10-26-2017, 09:23 AM   #18
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

Tree, I recently replaced the probes on my black and gray tanks with Horst Miracle Probes. (Bought them thru Amazon as I recall). They were fairly easy to install, even though the clearance and access to them was somewhat tight. They fixed my tanks reading "high when empty" problem, and the monitor now seems to show things accurately.

- Jack
JackandJanet is online now   Reply With Quote
Old 10-26-2017, 09:38 AM   #19
Site Team
 
Treeclimber's Avatar
 
Join Date: Feb 2015
Location: SWFL Bonita Springs/Andrews, NC
Posts: 1,264
Default

Jack, Those are same ones I used, but it didn't fix the problem. I feel there is a wiring problem but can't easily change the harness. Visually checked all wires I could see or feel, but did not read the continuity. That would require two peeps and a loooong jumper. My DSO would not understand how to help. If it stinks, empty it! Just kidding.
Tree
__________________
Treeclimber
2703 Tow Lite
2002 Escalade
Bonita Springs, Fl. &
Andrews, NC
Treeclimber is offline   Reply With Quote
Old 10-26-2017, 10:03 AM   #20
Senior Member
 
Join Date: Apr 2017
Location: Rural Route, Gray County, S/W Kansas
Posts: 124
Default

We didn't have all this 'new fangled stuff' on the 'old' ones! Fortunately, I suppose, it all works on the "new one."

Although, I never use the Black Water Tank anyhow. Porta-Potties or a 2 Liter Juice Bottle (Coffee can for the Ladies) are nearly always available. Gray Water easily seeps into a small hole to drain away, and there is no need for a Dump Station, except for additional Fresh Water.
__________________

__________________
Formerly 2176B Classic since 1988, needs work!
Now 2600TFB since May 2017
1982 G20 3/4 Ton Chevy Sportvan
Navy Vietnam Vet
Bruce from Kansas is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Hi-Lo Trailers Worldwide or any of its affiliates. This is an independent, unofficial site.


All times are GMT -5. The time now is 10:43 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
HiLoTrailerForum.com Copyright 2010
×