I have a 2000 22L that is to low to the ground. Has anyone ever attempted to put the axle under the leaf springs (flip them) to get the height up? I have seen on you tube this could raise the height by 6"

Welcome to the forum. If I remember correctly, some members of the forum have raised their clearance on their trailers. Use the search feature. I'll see if I can find the link.

__________________
"Ruben"
2404T, 2003 2500HD 4X4 GMC Sierra SLT Crew Cab w/Astro camper shell and 2003 Chevy Tahoe LE 4X2
Far West Texas

Are you sure your trailer has leaf springs? Somewhere along the way HiLo switched to rubber torsion suspension.

__________________
My Great Wife Joyce
2018 Jayco Jay Flight 21QB
Formerly owned 1705T and 2310H
2012 F150 4X4 SuperCrew EcoBoost w/Leer Cap
Reese WD Strait-Line Hitch
Amateur Radio K3EXU

If you have torsion bar suspension, you can have spacers welded in between the frame and the axle to raise the trailer. That's what I had done.

- Jack

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew

I had that done also. My trailer is a 2001 and it has torsion axles. No leaf springs. I added about three inches to it. Works nice.

__________________
2201 TL

2010 Nissan Titan king cab SE
4x4