Door weather stripping pealed off in transit . . .
 

Hello all! Upon return of my last camping trip (Flagstaff Cinders are awesome!) I noticed that the insulation surrounding the door had come near completely off. I pulled over and tucked it inside the camper however I need some advice on the best way to adhere it back. Any input is appreciated!

Putting trim back.
 

DH says it is hard on the fingers. Bend the trim up into a u shape. The edges will slide in the edges of the metal. The tension holds it in. It might take a few tries,but persistence will pay off.

Thanks Sam! I'm going to give it a go as soon as the temp drops a bit, crazy record heat over here :(

Ours is just glued on. Ours was originally a peel and stick probably and we'll use a good grade of double stick tape or some Goop!