Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


General Hi-Lo camper discussion The perfect place to discuss your Hi-Lo camper
Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-13-2010, 12:08 PM   #1
Senior Member
 
Join Date: May 2010
Location: Ohio North Coast
Posts: 850
Smile HiLo Repair In Butler, Ohio Is Alive And Well

I talked with Jim & Rob and they are open for repairs. Here's the info:

J & R Repair
145 W. Elm St
Butler, Ohio 44822

Phone # 419-883-3001

Fax # 419-883-3002

Email - jrrepair@centurylink.net

Jim is Jim Seals and Rob is Rob Laher. The repair facility is at the original location. They had to get different phone numbers due to the change in ownership.
__________________

retiredcamper47 is offline   Reply With Quote
Old 08-13-2010, 12:54 PM   #2
Moderator
 
RichR's Avatar
 
Join Date: Feb 2010
Location: NW PA
Posts: 3,386
Default

That is good news! Please don't forget about your local Hi-Lo dealer, he needs to have some Hi-Lo repair business also.
__________________

RichR is offline   Reply With Quote
Old 08-13-2010, 04:21 PM   #3
Member
 
Join Date: Jul 2010
Posts: 5
Default Great Dealer if someone needs one here in Western NY.

Quote:
Originally Posted by RichR View Post
That is good news! Please don't forget about your local Hi-Lo dealer, he needs to have some Hi-Lo repair business also.
I agree! Your local dealer is a great source for us Hi Lo/ Tow Lite Owners. I just had to have my cables replaced on my 1998 Tow Lite. These were all the original ones from 98 so after 1 let go, decided to get them all replaced. I took my trailer to Mantelli Trailer Sales & Service in Lockport NY. I bought the trailer there in 1998 and this is the really the only thing that I have done to it. They did a very nice job on a job that I had no inclinations of doing. Seeing they have been a Hi Lo Dealer for many, many years, their service guys did an excellent job.They still have a few BN Hi Los in stock at hugh discounts if anyone is looking. The Owner told me that even though Hi Lo is out of the business, the majority of the parts you can buy all over.
polarispete is offline   Reply With Quote
Old 08-25-2010, 04:17 PM   #4
Member
 
Join Date: Mar 2010
Location: Shawnee, KS (KC Metro)
Posts: 33
Default national list

If someone had the info and/or the resources; a nationwide listing of
dealer or "rv" shops that have experience working on Hi-Lo's would be very
helpful. I'm sure throughout the U.S. that there are some shops that do
better work than others. I don't know that I would want to take mine to a
shop that doesn't have much experience with Hi-Lo's except for some the
common stuff (wheels, electrical).
__________________
2506C
2009 F-250 Crew Cab SD
Tony is offline   Reply With Quote
Old 09-02-2010, 08:30 PM   #5
Senior Member
 
vannooch's Avatar
 
Join Date: Jul 2010
Location: Greensburg, PA
Posts: 345
Send a message via Skype™ to vannooch
Default

I ordered some glide blocks and suspension parts from J&R Trailer Repair. Rob was most helpful with getting me the parts, actually they arrived the very next day.
I was very pleased with their operation and look forward to doing business with them in the future.
I installed the three glide blocks today in about an hour and a half, I think that I'll attack the suspension tomorrow.

Thanks Rob!!
vannooch is offline   Reply With Quote
Old 09-02-2010, 09:03 PM   #6
Member
 
Join Date: Aug 2010
Posts: 9
Default How did you replace the glide blocks?

Good information and thank you.

Please explain exactly how you replaced the glide blocks. Did you raise the entire the top half with jacks?
pcandella is offline   Reply With Quote
Old 09-03-2010, 08:40 PM   #7
Senior Member
 
vannooch's Avatar
 
Join Date: Jul 2010
Location: Greensburg, PA
Posts: 345
Send a message via Skype™ to vannooch
Default

Quote:
Originally Posted by pcandella View Post
Good information and thank you.

Please explain exactly how you replaced the glide blocks. Did you raise the entire the top half with jacks?
No, I took the guide rails off where the glide blocks need replaced and the ones across the camper from them. lowered the top about 16" pulled the top away from the bottom and pushed two 2x4"s in between. The bottom screws were tight to remove so I removed the top ones (with an R2 tip and a 1/4" wrench) and split the glide block off of the bottom with a cold chisel then backed them out with channel locks. I took me about 2.5 to 3 hours to do three blocks, that's from start (before learning curve) to finish. I used some almond silicone caulking in all of the holes behind and through the guide rails before reassembling.
Attached Images
File Type: jpg IMAG0253.jpg (87.2 KB, 46 views)
File Type: jpg IMAG0255.jpg (91.0 KB, 44 views)
File Type: jpg IMAG0259.jpg (93.6 KB, 39 views)
File Type: jpg IMAG0256.jpg (95.0 KB, 38 views)
File Type: jpg IMAG0258.jpg (90.3 KB, 38 views)
vannooch is offline   Reply With Quote
Old 09-03-2010, 09:19 PM   #8
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

Great post, vannooch! I can visualize what you did here and appreciate the "close quarters" work and having to work "blind". Must have been a whole lot of fun!

Do you think you got more clearance by lowering the top only 16" instead of all the way?

Thinking about it, I wonder if you might have gotten more with the top even higher? (I'm not trying to "second guess" here but the top could probably be raised and lowered with the rails out until you find an "optimum" position. And maybe that's exactly what you did!)

- Jack
__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew
JackandJanet is offline   Reply With Quote
Old 09-03-2010, 09:31 PM   #9
Senior Member
 
vannooch's Avatar
 
Join Date: Jul 2010
Location: Greensburg, PA
Posts: 345
Send a message via Skype™ to vannooch
Default

Quote:
Originally Posted by JackandJanet View Post
Great post, vannooch! I can visualize what you did here and appreciate the "close quarters" work and having to work "blind". Must have been a whole lot of fun!

Do you think you got more clearance by lowering the top only 16" instead of all the way?

Thinking about it, I wonder if you might have gotten more with the top even higher? (I'm not trying to "second guess" here but the top could probably be raised and lowered with the rails out until you find an "optimum" position. And maybe that's exactly what you did!)

- Jack
I tried it higher, the cables are too short and put alot of tension on the bottom rail of the top. I only lowered it 16" because I didn't want to lay down to work on it. Sixteen inches gave me enough play in the bottom rail without getting so low I couldn't work on it from a stool. I'm sure lowering it more would give you more room to work but 3" was enough for me.
vannooch is offline   Reply With Quote
Old 09-04-2010, 11:06 AM   #10
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

Quote:
Originally Posted by vannooch View Post
I tried it higher, the cables are too short and put alot of tension on the bottom rail of the top. I only lowered it 16" because I didn't want to lay down to work on it. Sixteen inches gave me enough play in the bottom rail without getting so low I couldn't work on it from a stool. I'm sure lowering it more would give you more room to work but 3" was enough for me.
Of course! *headslap* I hadn't thought of the fact that the suspending cables were shortened with the top up .

Thanks again for a good explanation of how you did this!

- Jack
__________________

JackandJanet is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Hi-Lo Trailers Worldwide or any of its affiliates. This is an independent, unofficial site.


All times are GMT -5. The time now is 02:53 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
HiLoTrailerForum.com Copyright 2010
×