|
08-16-2017, 02:31 PM
|
#1
|
Junior Member
Join Date: Aug 2017
Location: oregon
Posts: 1
|
Lift problem
I have owned my 21' Funlite for about 6 years--no problems raising or lowering until this week--will only raise up 1/4 of the way now and stops--fluid and battery are fine almost like something is stuck and won't allow it to raise any further--any ideas ?
__________________
|
|
|
08-16-2017, 02:56 PM
|
#2
|
Site Team
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,694
|
Glad you've joined us on the forum, Smint!
Maybe, something IS stuck. It's possible something has slipped down between the top and bottom halves, probably when the top was down or nearly down, since that's when there's a large gap there. You can crawl in to the trailer with a flashlight and check everywhere to see if you can find an obstruction in that area.
Other than that, you seem to have covered all the bases. Good luck!
- Jack
__________________
__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System, SoftStartRV mounted on A/C
2024 F150 Platinum FX4 3.5L PowerBoost SCrew
|
|
|
08-16-2017, 07:59 PM
|
#3
|
Senior Member
Join Date: Mar 2010
Location: Niagara Falls,NY
Posts: 4,228
|
Welcome to the forum
Jack has given you good advice. Hope this solves your problem. If not post again.
|
|
|
08-17-2017, 04:11 AM
|
#4
|
Senior Member
Join Date: Jul 2017
Location: Adrian, Mi.
Posts: 144
|
Please keep us up dated. I have owned my unit for less than 6 weeks so I am no expert. My top also wouldn't work. in my case the PO said the battery was replaced last year upon getting it home and checking it out it was 6 years old! My top went up about 6" and died. The solenoid would not even click. The Mini Monitor panel indicated a full charge but the panel took some heat at one time as it was badly melted. It also showed the black tank had two lights when empty and the grey three. The panel was giving me false info. When I replaced the panel with a new one and got a new battery my problem was solved.
Long story short, try jumping your battery just to confirm it is not the battery.
|
|
|
08-17-2017, 09:41 AM
|
#5
|
Senior Member
Join Date: Jul 2010
Location: central Virginia
Posts: 584
|
Hi Smint; First is the pump still running when the top stops raising? Besides something being stuck between the top and bottom check the guide tracks on the outside for a broken guide block. Check the cable pulleys for a broken pulley that may allow for a cable to become jammed. Also get under the RV and check for a bent safety bar or any other problem with the lifting system. Let us know what you find.
__________________
Jim L & Faye
2805C
2003 Silvarado diesel crew cab
2017 Silvarado, crew cab 1500 6.2L gas w/ 8 speed tranny
central VA
|
|
|
08-31-2017, 11:10 AM
|
#6
|
Member
Join Date: Mar 2011
Posts: 29
|
Check under neath cables? Check elec system ,check obstruction in between unit inside with light ?
|
|
|
08-31-2017, 11:12 AM
|
#7
|
Member
Join Date: Mar 2011
Posts: 29
|
Fill Pump with Fluid may have air bubble?
|
|
|
08-31-2017, 04:14 PM
|
#8
|
Member
Join Date: Sep 2016
Location: ohio
Posts: 32
|
lift promblems
I agree with JimL the cables might be jammed. Let us know what you fined.
|
|
|
09-05-2017, 11:54 PM
|
#9
|
Member
Join Date: Sep 2017
Location: California
Posts: 8
|
Bent safety bar
Quote:
Originally Posted by JIM L
Hi Smint; First is the pump still running when the top stops raising? Besides something being stuck between the top and bottom check the guide tracks on the outside for a broken guide block. Check the cable pulleys for a broken pulley that may allow for a cable to become jammed. Also get under the RV and check for a bent safety bar or any other problem with the lifting system. Let us know what you find.
|
Hey there,
I have a bent safety bar do you know how to fix it?
Thanks!
|
|
|
09-06-2017, 02:09 AM
|
#10
|
Senior Member
Join Date: Oct 2016
Location: ohio
Posts: 454
|
take the gorilla tape off the sides of it! ha ha lol
|
|
|
09-06-2017, 03:25 PM
|
#11
|
Member
Join Date: May 2017
Location: Oklahoma
Posts: 68
|
A Big hammer should work
|
|
|
09-07-2017, 03:16 PM
|
#12
|
Senior Member
Join Date: Mar 2010
Location: Far West Texas
Posts: 1,370
|
Quote:
Originally Posted by snowshoe76
Hey there,
I have a bent safety bar do you know how to fix it?
Thanks!
|
Well, if you need a new one, these cats may be able to help you out.
Home - JR REPAIR
Midget RV & Trailer Service HiLo Specialist
__________________
"Ruben"
2404T, 2003 2500HD 4X4 GMC Sierra SLT Crew Cab w/Astro camper shell and 2003 Chevy Tahoe LE 4X2
Far West Texas
|
|
|
09-07-2017, 03:39 PM
|
#13
|
Site Team
Join Date: Feb 2015
Location: SWFL Bonita Springs/Andrews, NC
Posts: 1,264
|
Not an easy job, but the guide rod and cables need to be dropped. Then the lift cylinder, the safety bar will just drop down, carefull of your head when it does drop, ask me how I found out.
In the "search" heading, look for "How to remove and replace hydraulic lift cylinder".
Tree
__________________
__________________
Treeclimber
2703 Tow Lite
2002 Escalade
Bonita Springs, Fl. &
Andrews, NC
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|