refrigerator doesn't work
 

The refrigerator in my 2903c doesn't work. The indicators in the control panel seem to switch to the various sources but there is no cooling from either the 12v or the 110v modes. When I switch to gas the system will light up then go off and the "check" indicator will light up after a few minutes. Any suggestions?

Randy,

I had a similar problem with my 2901L. I checked all the fuses behind the fridge and had to replace the black electronic panel that is mounted on the rear of the fridge. Have to take the outside plastic vent cover off to see it. I believe it cost me around $400 parts & labor a couple of years ago. It has a black plastic cover that you can pop off to expose 3 glass tube fuses. Dometic calls it a power module assembly. Their part # is 3308741.002 for a 2-way fridge and #3308742-000 for a 3-way fridge. There is a less expensive brand out there called a "Dinosaur Board". Hope this helps. Good luck.

Bob