Would anyone happen to know what roof I have on my 2004 Hi Lo, model 22T? I can't tell if it is rubber or fiberglass or something else?

Also, any recommendations on what I can use to re-seal it. I went to a RV place and the service department wants to much money to reseal my roof. Fortunately, I have no leaks. Just concerned about the age.

Thanks a lot

Ken

If the roof has a pebbly finish and has seams it is aluminum. If it is more smooth and is seamless it is rubber. There were a couple of model years that used rubber but they went back to metal. I don't think HiLo used fiberglass. For metal use Koolseal Elastomertic coating, for rubber use a product made specifically for rubber roofs. You can get Koolseal at True Value Hardware stores. Kool Seal White Elastomeric Roof Coating , 4.75 Gals.: Model# KS0063300-20 | True Value

There is a lot of discussion here on the subject. Use the search option above to look for roof coating, etc.

Brochure:http://www.hilotrailerforum.com/f52/...-2004-hi-lo-6/

__________________
My Great Wife Joyce
2018 Jayco Jay Flight 21QB
Formerly owned 1705T and 2310H
2012 F150 4X4 SuperCrew EcoBoost w/Leer Cap
Reese WD Strait-Line Hitch
Amateur Radio K3EXU

Raiderboy...You are smart to do preventive maintenance on your roof. Wash the roof and let it dry. Tape off where to roof meets the side of the RV. This will give you a crisp paint line. Follow all the directions for the product you are using. This is easily a DIY job.

Thanks.... Just one more question, everyone. Can you walk on the roof? Not sure how I will be able to seal the roof without walking on it if you can't kneel on it. Any suggestions?

Ken

Ken, I walk on mine all the time (with the top down of course). I feel certain your trailer is new enough that you can walk on it also.

- Jack

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew

I recommend only in the lowered position. You can lay a piece of plywood across to dissipate your weight as well.

__________________
"Ruben"
2404T, 2003 2500HD 4X4 GMC Sierra SLT Crew Cab w/Astro camper shell and 2003 Chevy Tahoe LE 4X2
Far West Texas