Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


General Hi-Lo camper discussion The perfect place to discuss your Hi-Lo camper
Reply
 
Thread Tools Search this Thread Display Modes
 
Old 02-10-2011, 04:35 PM   #1
Member
 
Join Date: Feb 2011
Posts: 3
Default Soft floorboard

Hi everyone,

First post on the board and first off just want to let everyone know that I think this whole board is absolutely great. I just purchased my first hi-lo (graduated from pop-up) for a steal of a deal (lucky me).

In the bathroom under the big "hamper" style storage space there is about a 6 inch by 6 inch spot of soft flooring. The previous owner told me it came from a leak in the plastic cap on the roof which broke and allowed water in that pooled at that spot. The leak has been repaired, but the floor needs repairing. I'm in no rush, since this is not a spot where any person can stand or anything, but I would like to fix it.

What is the best way to do this? Since the surrounding areas are strong, I was thinking about just getting a big piece of plywood and putting over the bad spot, bracing with the surrounding good spots. Anyone have a better idea?

Thanks

Kirk
__________________

Kirkv is offline   Reply With Quote
Old 02-10-2011, 04:56 PM   #2
Moderator
 
Join Date: Apr 2010
Location: Napa,CA
Posts: 933
Default

Quote:
Originally Posted by Kirkv View Post
Hi everyone,

First post on the board and first off just want to let everyone know that I think this whole board is absolutely great. I just purchased my first hi-lo (graduated from pop-up) for a steal of a deal (lucky me).

In the bathroom under the big "hamper" style storage space there is about a 6 inch by 6 inch spot of soft flooring. The previous owner told me it came from a leak in the plastic cap on the roof which broke and allowed water in that pooled at that spot. The leak has been repaired, but the floor needs repairing. I'm in no rush, since this is not a spot where any person can stand or anything, but I would like to fix it.

What is the best way to do this? Since the surrounding areas are strong, I was thinking about just getting a big piece of plywood and putting over the bad spot, bracing with the surrounding good spots. Anyone have a better idea?

Thanks

Kirk
That would work,to cover the whole floor in the wardrobe with plywood, then put on new floor covering. Cut out the damaged area, piece in a new piece with furring strips. Or cover the floor with laminate flooring (smaller pieces might be easier to work with).
__________________

__________________
Les & Patricia
2006 22ft towlite (replaces 97 21TL)
2006 Toyota tacoma pre-runner 4.0 L V-6 quad cab
w/ 98 chevy Powervision towing mirrors
2017 Chevy Silverado 1500 5.3 v8 (replaces Toyota)
2 Hobie mirage pedal drive kayaks
campthewestcoast is offline   Reply With Quote
Old 02-10-2011, 09:24 PM   #3
sam
Senior Member
 
Join Date: Mar 2010
Location: Niagara Falls,NY
Posts: 4,048
Default Trailer Life Magazine-March2011

Trailer Life Magazine has an article, Tips on roof&Awning maintenance. This is a good article for new owners or maybe a refresher for us experienced campers. Think Spring!!
sam is offline   Reply With Quote
Old 02-12-2011, 11:07 AM   #4
Member
 
Join Date: Apr 2010
Location: NW PA
Posts: 57
Default

If there is a hole through the floor or if you feel the damaged area will continue to deteriorate, this is how I would repair the floor. I will assume there are no obstructions under the trailer.

I would remove the floor covering inside the wardrobe.
Cut out the damaged area of the floor.
Measure the thickness of the trailer floor.
Obtain a piece of exterior grade (Not Treated) plywood the same thickness as the trailer flooring.
Check with local contractors for the plywood, they might have a piece of leftover plywood that would work for you.
Cut a piece of the plywood larger than the hole that you cut in the floor.
Lay the plywood patch over the hole and trace around it.
Mark the patch so that it will be installed in the same direction that it was when it was traced.
Cut the trailer flooring on the traced line.
Make sure the new patch fits the hole.
Cut a piece of plywood to cover the area inside the wardrobe where the floor covering was removed.
Use exterior grade deck screws to fasten the new plywood floor to the trailer flooring.
If the plywood is less than 5/8” thick I would also use construction adhesive.
If the trailer flooring is made from OSB (Oriented Strand Board), I would place the screws from the outside up through the OSB into the plywood.
Make sure the screws are not too long that they protrude through the plywood.
From the underside of the trailer, paint the area of the plywood floor that is visible through the hole and the cut out area of the trailer floor.
Use exterior grade primer.
Prime the new plywood patch, especially the edges. Remember not to cover the orientation marking that you marked earlier.
Secure the plywood patch with deck screws.
Neatly seal the gap around the patch with a good caulk that can be painted.
Try not to smear the caulking.
Use a good metal paint to paint the exposed screw heads.
Prime and paint the patched area.
Inside the wardrobe, if you are going to install vinyl flooring, I would fill all knotholes and large gaps with floor leveler.
Install new floor covering.
__________________
Thankful


1998 21TL
2005 Silverado
Thankful is offline   Reply With Quote
Old 02-18-2011, 09:30 AM   #5
Member
 
Join Date: Feb 2011
Posts: 3
Default Thanks

Thanks everyone for the responses!!
Kirkv is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Hi-Lo Trailers Worldwide or any of its affiliates. This is an independent, unofficial site.


All times are GMT -5. The time now is 04:11 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
HiLoTrailerForum.com Copyright 2010
×