Hi-Lo camper travel trailer forum

Hi-Lo camper travel trailer forum (https://www.hilotrailerforum.com/)
-   General Hi-Lo camper discussion (https://www.hilotrailerforum.com/f17/)
-   -   spare tire (https://www.hilotrailerforum.com/f17/spare-tire-3041/)

superdave 04-13-2013 02:34 PM

spare tire
 
hi lo funchaser 86-just purchased..where is the spare tire spose to be and how to fix ignitor on hot water heater? aprox cost?

sam 04-13-2013 03:17 PM

fixing hot water igniter.
 
Do an internet search for the make and model # of your water heater. Companies are good with tech help and exploded parts diagrams. Check for any how to do videos on you tube. Mantelli trailer sales will mail you parts and answer any questions you may have. Jay Simon in parts 716-625-8877. They have been a HiLo dealer for many years.

renoites 04-14-2013 12:02 PM

superdave
I have an 85 funchaser and the spare is mounted to the rear bumper.
My h2o htr is a pilot light not an ignitor. If is an ignitor, it will have wires that run to the flame output area from a switch.

hth
steve

RichR 04-14-2013 01:53 PM

Some models had the spare on the underside. I think I remember seeing a spare mounted up front under a cover behind the LP tanks where the batteries are in most later models.

paulsot 04-19-2013 08:01 AM

I have a 87,,22ft and it has a pilot light for the water heater .the spare tire is mounted to rear bumper..has a bracket for spare tire..

RichR 04-19-2013 09:37 AM

I don't know about your model but on the Towlite models the spare tire was an extra cost option. Most came through with them, but I think it was a pricing thing that HiLo had to make it look more attractive, and, of course, they made more profit from the options.

JoeJones 04-21-2013 09:31 PM

Spare tire nut size-2705T
 
As a matter of interest, the socket fitting you can put on a drill that will raise and lower your stabilizers will also fit the nut on the spare tire under the HiLo. However, it is not the same size as the nut on the tires. Of course,you could not turn lug nuts with a battery powered drill. Lug nuts are torqued at 90 ft lbs if done properly.
Phantom Driver:)


All times are GMT -5. The time now is 10:41 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
HiLoTrailerForum.com Copyright 2010