Go under the trailer and remove the hydraulic line from the cylinder. Put a large coffee can under the line to collect the fluid. Press the raise button and purge out the fluid(it comes out fast). Leave to drain the last remaining fluid. Refill the pump with a small amount of trans fluid and re-drain. Fill the pump to the correct level.
You will have removed the bad plus purged the last possible amount of water contaminant.
Do NOT run pump long when empty/dry, 2-5 seconds.
That is how I did it anyway. No issues!
steve
__________________
2002 ford f350, 7.3 diesel
1985 hi-lo funchaser
kb0nai
kd7ctk
|
Hydraulic fluid change
Linear Mode
