Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Hydraulic lift system Hydraulic, mechanical and electrical components of the lift system
Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-02-2022, 06:02 PM   #1
Cid
Member
 
Join Date: Feb 2022
Location: Arizona
Posts: 23
Default Hydrolic reservoir

I just bought a 1981 17 ft trailer. Top goes up and down nicely but I read about a hydrolic reservoir. Where can I find that little gem? Super novice here.
__________________

__________________
Cindy Weik
Cid is offline   Reply With Quote
Old 04-02-2022, 11:05 PM   #2
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

It's in the tongue battery box on newer trailers, I think it's there in yours as well. It is attached to the lifting motor and mine is white plastic. It will have a cap that's about 1.5" in diameter on the top that unscrews easily by hand. You check the fluid level with the top DOWN, which may make that difficult. I use a bent straw or piece of wire that I can insert as a dipstick. The fluid should be within about 1" of the top of the reservoir with the top down.

- Jack
__________________

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew
JackandJanet is offline   Reply With Quote
Old 04-03-2022, 08:51 AM   #3
Cid
Member
 
Join Date: Feb 2022
Location: Arizona
Posts: 23
Default

Nope! My lift motor is under step. Thanks so much for the reply. I will keep looking.
__________________
Cindy Weik
Cid is offline   Reply With Quote
Old 04-03-2022, 10:48 AM   #4
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

I just looked in our HiLo brochure library and we don't have anything for 1981 HiLos. It appears there was a "SuperLight" 17' trailer made in 1980 and it had a manual lifting system with an option for motorized. In 1982, the smallest was 18'.

I still think the tank will be attached to the motor, so if you've found that, look there.

- Jack
JackandJanet is offline   Reply With Quote
Old 04-03-2022, 04:33 PM   #5
Cid
Member
 
Join Date: Feb 2022
Location: Arizona
Posts: 23
Default

Took a pic of motor. It says Super Jack 12 volt power jack. Maybe it is electric so there is no reservoir.?
__________________
Cindy Weik
Cid is offline   Reply With Quote
Old 04-03-2022, 05:32 PM   #6
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

Quote:
Originally Posted by Cid View Post
Took a pic of motor. It says Super Jack 12 volt power jack. Maybe it is electric so there is no reservoir.?
Cindy, that may well be true. I have NO personal knowledge at all of earlier model HiLos. It could well be that the lift system is entirely driven by an electric motor without using any hydraulic assist at all. If so, that's one less thing you have to worry about.

Possibly, someone with a similar model year trailer will chime in and help confirm this.

- Jack
JackandJanet is offline   Reply With Quote
Old 04-07-2022, 03:39 PM   #7
Member
 
Join Date: Apr 2020
Location: ON - Ontario
Posts: 7
Default

I have s 2007 17ft trail lite and the reservoire is in the tongue box. Mine is steel not plastic , black not white.
Carver is offline   Reply With Quote
Old 04-07-2022, 04:26 PM   #8
Member
 
Join Date: Jan 2016
Location: Michigan
Posts: 7
Default

The 1981 owner's manual shows that there was an electric hydraulic lift system and an electric mechanical ball screw system depending on the model.

Since the motor is under the step, it sounds like it may be electric screw type system. Looks like a re-purposed electric tongue jack.

It also shows the integrated steel reservoir on the pump/motor in the hydraulic system.

https://www.hilotrailerforum.com/f49...o-models-3467/

Edit: A quick google shows the Super Jack is an electric mechanical tongue jack.
Green River is offline   Reply With Quote
Old 04-07-2022, 04:39 PM   #9
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

Good find, Green River - thanks, bunches! I agree, if the motor is under the step, it's a modification of the tongue jack. Since my tongue jack can lift 3500# (and there are even higher capacity ones available), it makes me wonder why HiLo ever went with a hydraulic system. Seems an unnecessary complication, with more things to break down.

- Jack
JackandJanet is offline   Reply With Quote
Old 04-07-2022, 05:21 PM   #10
Member
 
Join Date: Sep 2014
Location: Colorado Springs, CO
Posts: 5
Default Jack-Screw Lift System

My 1681-SLX HI-LO Funlte does indeed have an electric motor driven jack-screw. The HI-LO Care and Use Manual that was still in my unit when I bought it in 2017, shows the optional 12V Powerhead replacing the mechanical ball screw/hand crank lift system. The hand crank is under the front lounge/bed, by the 10gal fresh water tank & pump. The back page indicates the following HI-LO models: 2581, 2181, 1881, 1681-SL & 1681-SLX.
DF5776 is offline   Reply With Quote
Old 04-07-2022, 05:28 PM   #11
Member
 
Join Date: Sep 2014
Location: Colorado Springs, CO
Posts: 5
Default

The motor and transverse jack-screw are just ahead of the axle behind the steps. The cables and pulleys are otherwise the same as the hydraulic lift.
DF5776 is offline   Reply With Quote
Old 04-07-2022, 06:04 PM   #12
Cid
Member
 
Join Date: Feb 2022
Location: Arizona
Posts: 23
Default

Thanks so much. Is a copy of your owners manual on this site? Appreciate the information.
__________________
Cindy Weik
Cid is offline   Reply With Quote
Old 04-07-2022, 06:22 PM   #13
Member
 
Join Date: Jan 2016
Location: Michigan
Posts: 7
Default

Quote:
Originally Posted by Cid View Post
Thanks so much. Is a copy of your owners manual on this site? Appreciate the information.
I found it here on the site:

Hi-Lo camper travel trailer forum > Library > Reference Library > Hi-Lo Owners Manual

And the link to the manual is in my post. But just in case, here it is:

https://www.hilotrailerforum.com/f49...o-models-3467/
Green River is offline   Reply With Quote
Old 04-07-2022, 06:28 PM   #14
Member
 
Join Date: Jan 2016
Location: Michigan
Posts: 7
Default

I would rather see one of those jacks on each corner of the upper half than the cables. I put 2x4s at each "resting point" when the top is raised and people are inside because, even though there is a catch to stop the cylinder creep, there's nothing there to stop the top from coming down if a couple of cables break or the bolts let loose.
Green River is offline   Reply With Quote
Old 04-08-2022, 12:46 AM   #15
Senior Member
 
Join Date: Sep 2011
Location: Charlotte, NC
Posts: 147
Default

Ours was in the battery box!
__________________
Elaine and Bill Stevenson
Former HiLo-Classic 310S
2011 Toyota Sequoia
Elaine and Bill is offline   Reply With Quote
Old 04-08-2022, 09:45 AM   #16
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,527
Default

Green River - the safety bar would keep the top from "crashing" down on occupants if the cables should break as long as it is engaged. An easy test you can do is to try to lower the top without pulling the safety bar release. When you push the switch to lower the top, it removes all lifting force on ALL the cables, which simulates a simultaneous failure of all the cables. The top will not come down. If you do this, don't leave the top resting on the bar, push the lift switch up to raise the top off the safety bar and put the support of the top back on the cables.

Edit: Another forum member, english775, just pointed out to me that what I've printed above may be totally wrong. He says the safety bar simply keeps the hydraulic ram from moving and that it in no way "supports" the top. If this is correct, then the bar WOULD NOT keep the top from coming down if all the cables broke. So, I'm going to have to do a bit of further research.

However, I'm still not convinced the top would "crash down" if a cable broke. It might if ALL cables broke simultaneously, but if they failed one at a time, the top would sag on the corner that was not supported and it would tend to bind in the tracks, which would stop it from lowering. Indeed, this has been the experience of members who have had cable failure. The top binds and it will not move until the low corner can be lifted to match the others.

In any case, there is no instance reported that I know of where the top has "fallen" dangerously due to cable failure.


I'm not saying using 2x4s to support the top when it is up is a bad idea. Several members do this if the top is going to be up for a long time to take the strain off the cables.

The problem with having a powered jack on each corner is that you need some way to regulate the lifting speed of them all so that the corners are lifted at the same rate. If one moves faster than the others, the top will "bind" as it goes up and lifting will stop.

- Jack
JackandJanet is offline   Reply With Quote
Old 04-08-2022, 02:21 PM   #17
Moderator
 
RichR's Avatar
 
Join Date: Feb 2010
Location: NW PA
Posts: 3,386
Default

Quote:
Originally Posted by Green River View Post
I would rather see one of those jacks on each corner of the upper half than the cables. I put 2x4s at each "resting point" when the top is raised and people are inside because, even though there is a catch to stop the cylinder creep, there's nothing there to stop the top from coming down if a couple of cables break or the bolts let loose.
That has been tried but with poor results. The motors all have to be synchronized at the same speed and apparently, that is very difficult to achieve.
__________________

__________________
My Great Wife Joyce
2018 Jayco Jay Flight 21QB
Formerly owned 1705T and 2310H
2012 F150 4X4 SuperCrew EcoBoost w/Leer Cap
Reese WD Strait-Line Hitch
Amateur Radio K3EXU
RichR is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Hi-Lo Trailers Worldwide or any of its affiliates. This is an independent, unofficial site.


All times are GMT -5. The time now is 02:46 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
HiLoTrailerForum.com Copyright 2010
×