Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Hydraulic lift system Hydraulic, mechanical and electrical components of the lift system
Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-29-2019, 01:46 AM   #1
Gone Traveling
 
Join Date: Oct 2017
Location: Maui Hawaii
Posts: 47
Default Lift "Piston" for the hydraulic ram ~ 1999 29 C Also a replacement main door lock

looking for a replacement piston that goes into hydraulic sleeve for lift system. This is a 29 footer so pretty sure it may be a little larger? idk
learn me professor

I bent the crap out of mine, help?
__________________

davidmaui is offline   Reply With Quote
Old 09-16-2019, 09:07 PM   #2
Member
 
Join Date: Jul 2010
Location: San Antonio, Texas
Posts: 78
Default Hydraulic Ram

If you haven't found your ram, if you have a hydraulic service company anywhere near where you live, they can probably fix you up. If you can't locate a service facility, call your local large tractor dealer (Case, Kubota etc.), they can probably point you in the right direction.
__________________

Richard is offline   Reply With Quote
Old 09-17-2019, 02:00 AM   #3
Gone Traveling
 
Join Date: Oct 2017
Location: Maui Hawaii
Posts: 47
Default Funny , I was just under there today

Well, Today I did an full assessment of the situation to see what had to be taken off.
Oh man. My hydraulic shaft...That buggah...is bent to all hell.
I looked at how to pull the whole assembly out.(Hydraulic sleeve and ram.) Looks like I have to remove the cables in the way of very small pass thru on carriage for the hydraulic unit. It has the cables run thru...going to get them out of way first. then I can have room to slide the whole hydraulic unit out. But will have to take all bushings off the sides of it so it will slide thru that small cable pass thru in the carriage frame that holds it it place. Not real impressed with the design. Was a shortfall in production if you ask me.
They could have figured out a slip fit mount for the hydraulics and with a separate cable guide. But it is all compacted together and just a fuster cluck. Oh well< guess it got the job done...Raise the roof.
Also have to figure out how to get separated threaded part (It broke off of push shaft) of the hydraulic ram out of the cable plate. the plate assembly where the four cables are moved by the ram.The shaft is threaded into the pulley plate. Mine broke off just flush with the plate. So. that will be fun. Have to take the cable pulleys OFF the plate so I can see if I can get the threaded end out of plate.
Its a mess. I got set up today under there...but didnt feel like dealing with the hydraulic fluid evac. so left it for another day...it is hot here in Hawaii...90s ...welcome to the day of living hell. I am at altitude on island...it isnt supposed to be this hot!
Maybe if the trades kick back in Ill get back under there. Will check local hydraulic shops...wish me luck~

The process is slow...out come. unknown,but the effort is without fail.

(10) Ten 27 footers with a 29 , and (3) Three 24 footers 2018 .
Still living in 29....2019...sold the rest to happy Islanders.
Towed them All with a LandRover Disco 2.
Aloha, D
davidmaui is offline   Reply With Quote
Old 09-17-2019, 09:12 AM   #4
Moderator
 
RichR's Avatar
 
Join Date: Feb 2010
Location: NW PA
Posts: 3,386
Default

How did the ram get bent? Have you been cleaning and greasing the guide rod? That is quite often the culprit.
__________________
My Great Wife Joyce
2018 Jayco Jay Flight 21QB
Formerly owned 1705T and 2310H
2012 F150 4X4 SuperCrew EcoBoost w/Leer Cap
Reese WD Strait-Line Hitch
Amateur Radio K3EXU
RichR is offline   Reply With Quote
Old 09-17-2019, 02:01 PM   #5
Site Team
 
Treeclimber's Avatar
 
Join Date: Feb 2015
Location: SWFL Bonita Springs/Andrews, NC
Posts: 1,264
Default

david, in the "search" header there is an outline to "remove and replace hyd lift cylinder". It's a "sticky" used for just this occasion. You MAY be able to remove that broken fitting on the cable head by drilling it from the cylinder side, take the nut off and use a larger "easy out" to remove the threaded portion.
__________________
Treeclimber
2703 Tow Lite
2002 Escalade
Bonita Springs, Fl. &
Andrews, NC
Treeclimber is offline   Reply With Quote
Old 09-17-2019, 03:12 PM   #6
Gone Traveling
 
Join Date: Oct 2017
Location: Maui Hawaii
Posts: 47
Default Funny story that...

Quote:
Originally Posted by RichR View Post
How did the ram get bent? Have you been cleaning and greasing the guide rod? That is quite often the culprit.

It was a cool dark morning back in June in the foothills East of L.A. , I was overnighting in trailer/ had just shipped an F450 and another 27 footer the day before from Port of Long Beach. So I was relying on a transport driver to get me and my trailer to Long Beach. I flew back that day to Maui.
In L.A. You leave in the dark from 65 miles out, if you are lucky, you get to port By *8 am .
So my transport driver shows up. I get ready to drop the top. I yell out. Is everything out of the way ?
He says yes. Only thing. When you ship overseas, you can not ship full propane containers. So you remove them. Which, we had just done.
Carefully putting the hardshell Propane cover on top of the spare tire, ( battery/hydraulic area in most Hi Lo s) , Well I dont know what the guy was looking at when I said all clear? But the shell was still under the eave for the kitchen window. I went down,,,and heard a crunch...at the same time. The shaft was being bent below I suppose.
Forest Gump's Mom was right. Stupid is as stupid does. Never rely on the hired help.

Check yourself.

Being that, I had No coffee, no sleep night the before. It Was rough take off.
Now I was facing having to send it off like this...still half up and all cockeyed. The hitch end considerably higher then the other.
SThe Whole Point, I buy Hi Lo, is because I can cut my shipping costs by about 1/3 . Which, I can translate to the buyer.
Well, that trailer was over $7000 on shipping after they measured it at the port, Lucky for me, I had a good repoire with the booking agents and they gave me price by specs on trailer after explaining to them my dilemma.
Only cost $5100 So wheew. Dodged a bullet there!
Climber, I've done my share of easy out work....this one looks like the bolthead is frozen inside. will prep with oil and see what happens. Lots to do...aloha
PS- The trailer arrived...and the top was all the way down and even?
__________________

davidmaui is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Hi-Lo Trailers Worldwide or any of its affiliates. This is an independent, unofficial site.


All times are GMT -5. The time now is 10:59 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
HiLoTrailerForum.com Copyright 2010
×