Fixed a factory oversight yesterday.
 

The front cap on my 2209T only had 4 screws on each side, and the distance between the bottom screw and the next screw was 14 inches.

A little bit ago, I noticed that great distance between the screws allowed the front cap to bow out at least 1/4 inch. Probably all the head we just went through caused it.

In any case, I got a box of Robertson screws that look exactly like what's already on the TT, and added 5 more. Now the cap is secure against the sidewall.

After this, I recaulked both sides up front, after stripping the old caulk off.