Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Electrical Systems, Charging and Solar Electrical components and wiring, batteries, charging systems, generators and solar topics.
Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-31-2017, 12:36 PM   #1
Member
 
Join Date: Apr 2016
Location: Washington
Posts: 31
Default LED running lights reversed polarity don't work?

I bought some small LED bulbs to replace the running lights and yellow side turn signals on my 2005 17'

They don't work when plugged in, but If I run a small lead to switch the polarity they do work.

Turns out either my bulbs are wired with reverse polarity, or the camper is. Has anyone else had this problem?

I'll probably just stick with incandescent for these, but I'm curious if there's an easy fix.

The main brake lights work fine with LED bulbs.
__________________

montana is offline   Reply With Quote
Old 05-31-2017, 01:33 PM   #2
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,524
Default

Montana, can you turn the bulbs so that the pins on them go into the opposite ends of the sockets? This should correct the polarity problem. If not, you could simply take the light housing off the trailer and reverse the wire connections.

LEDs ARE polarized, and unless they contain circuitry to correct a reverse polarity, they won't work if the current tries to flow in the wrong direction.

- Jack
__________________

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew
JackandJanet is offline   Reply With Quote
Old 05-31-2017, 01:55 PM   #3
Site Team
 
Treeclimber's Avatar
 
Join Date: Feb 2015
Location: SWFL Bonita Springs/Andrews, NC
Posts: 1,264
Default

Montana, Did the same thing a couple of years ago. Never changed the bulbs, still have them. But I'm wondering if it's worth the time to reverse all those fixtures. Not much voltage loss driving down the highway.
Tree
__________________
Treeclimber
2703 Tow Lite
2002 Escalade
Bonita Springs, Fl. &
Andrews, NC
Treeclimber is offline   Reply With Quote
Old 05-31-2017, 03:43 PM   #4
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,524
Default

Quote:
Originally Posted by Treeclimber View Post
Montana, Did the same thing a couple of years ago. Never changed the bulbs, still have them. But I'm wondering if it's worth the time to reverse all those fixtures. Not much voltage loss driving down the highway.
Tree
Right! And they're possibly on only at night too. Mine are not on during the day, even though I had my truck modified to have Daytime Running Lights.

- Jack
JackandJanet is offline   Reply With Quote
Old 05-31-2017, 06:02 PM   #5
Member
 
Join Date: Apr 2016
Location: Washington
Posts: 31
Default

My feelings exactly. I spent a little while seeing if I could trace the wires back to one spot and switch the polarity at the source, but figured I'd do more harm than good and just decided to live with it.

I'm not too worried about the power saving. I just like the look of the bright LEDs and I really like how long they tend to last.

I might yet pull the fixtures off and flip the wires, but I'm not holding my breath.
montana is offline   Reply With Quote
Old 05-31-2017, 11:48 PM   #6
Site Team
 
JackandJanet's Avatar
 
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,524
Default

I don't think you'd want to change the polarity of the entire circuit, because that would flip the polarity of the (non-braking) taillights too. They MAY be wired internally to be non-polarized, but I wouldn't do it without testing them.

I think you should check the running light bulbs. It's possible that if only one of them is inserted "flipped", it would cause the whole bunch to be dead.

If you have a bit of wire (to use as a jumper), you could determine which is the positive and negative pins on the bulb by trying to light one directly off your car battery. I've done this to test an LED that I thought might be faulty.

Another approach: Put all the incandescent bulbs back in. Then, one at a time, testing as you go, replace each with an LED. Flip the bulb if it doesn't light.

- Jack
__________________

JackandJanet is offline   Reply With Quote
Reply

Tags
led

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Hi-Lo Trailers Worldwide or any of its affiliates. This is an independent, unofficial site.


All times are GMT -5. The time now is 11:30 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
HiLoTrailerForum.com Copyright 2010
×