NEED HELP!! ELX-45 converter power panel swap to progressive dynamics 9200 converter
1 Attachment(s)
please i need to know if anyone has done this swap and could walk me thru the install on the DC panel. my 2007 elixir elx-45 unit does not have enough lugs to have ALL the wires i need in it without ones touching so that to me doesnt look like it will work. i dont think you can hard wire the ground to the new converter which my unit was jerry rigged to hard ground into the battery box which makes no sense but im stumped as i have it all out and im waiting for my new PD 9200 series and i just need to know where the wires will end up. if anyone has pictures id die!! and i would love to hear input on the install. please anything relevant will help!! i already have my AC power figured out i just need to know where to wire the new inverter to the old 12v DC fuse board, or i need to know if you bought a different board with 4 lugs on it instead of just the 3 i see on mine :-(:(:(:rolleyes::mad::mad::mad::mad::mad::mad::mad:
|
sorry picture is sideways -_-
|
oh and also if i have to buy the 12v panel or that is what you did with success please let me know where to buy the 12v fuse panel with the 11 slots or more, i cannot for the life of me find the RV 12v fuse panel online with 4 lugs. i know they make them aftermarket though i have seen one in a video on youtube. but it was a 60 amp one so i am not sure if that matters
|
Give a service tech at Best Converter a call.
www.Best Converter..com 1-888-828-1893 This is where we got our new converter from DH has a back ground in electrical electronics so he installed it in our 1990 25ft. Classic. It was even a little challenging for him. It this doesn't work out for you I will give you the contact info. for the parts person at our HiLo dealership. Have the model # of what you are replacing handy so they can guide you.Keep us posted.
|
Already have a friend at General RV who will take care of me but he is not the actual mechanic and the guys a really busy up here in the summer, if I cannot find out how to wire it up or get help I will end up there. Thanks though.
|
Quote:
|
Thanks very much Jim I was able to get it all wired back up and running lights furnace and hot water tank and outside lights too however all I have today is dead batteries I have everything working but my power jack and fridge and roof a/c, the Ac I believe is shot but the fridge worked before when I had batteries hooked up. Going to get a new battery tomorrow and see if anything changes I'm 100% sure the power front landing jack will work with a new battery and I will update. I'm taking pics to show what I did as well
|
Can you send me how to wire up converter pls
|
Nic, welcome to the forum. It would help to know what brand converter you are installing, but, here's a link to the thread I wrote when I installed my Progressive Dynamics converter. https://www.hilotrailerforum.com/f28...lacement-7659/ It has pictures and shows some mistakes and work-arounds I made when doing it.
- Jack |
You can look at our post, we replaced ours. we did it over the course of three days, taKing pictures and labeling things well. It's not bad.
|
All times are GMT -5. The time now is 04:57 AM. |
Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
HiLoTrailerForum.com Copyright 2010