propane gas detector
My propane gas detector would only work when I had the main switch down in the battery mode.
It turns out, the factory wired it to the battery side of the switch (the switch & the detector are next to each other in the dinette bench). I ran a 14 ga. wire across the underside of the floor in a waterproof conduit from the detector to the 12 volt fuse block (next to the convertor) with a 3 amp fuse Now the propane detector works on 110 volt park power or 12 volt battery power Les 97 21' Towlite |
All times are GMT -5. The time now is 11:25 AM. |
Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
HiLoTrailerForum.com Copyright 2010