1992 Funlite
 

Hi Everyone. I just purchased a Hi-Lo Funlite. It has been treated pretty bad in it's short life. I am looking to see if anyone has an idea where I can find the lower rear pulley AND the bracket that it's attached to. My Funlite is missing the whole steel piece that the pulley is attached to, not really sure how the former owners did that, but it's missing. It's on the door side. Just FYI pictures always make things look better then they really are, I bought this sight unseen. Any help would be appreciated.

Check this link for parts: https://www.hilotrailerforum.com/f5/j...parts-com-893/

Also, most decent fabricators could weld in an L piece of metal for the bracket. Check around for RV repair folks- they should also be able to do it. Im having to have one repaired for my trailer after an accident.

rick

Re-1992 Funlite
 

Thank you for your help. I'll check with someone for the welding and the pulley. I hope I can find the right size.

Below is a link to midget trailer. The link should take you directly to a page titled major lift components. I'm sure you don't need the whole kit but it does give you pics and sizes of the different pulleys.
https://hilotrailerparts.webs.com/app...s/show/2069765

92 funlite
 

Thank You for the link. My pulley is still on the cable, but the entire steel beam that holds the pulley is missing. I wasn't sure if I should replace the pulley or use the old one. Maybe since there are different sizes it might be better to use the old one?

Welcome to the forum.
 

Hopefully,One of the places in Ohio can sell you the parts you need. Let us know if you get them. Our forum members are very good answering questions.Just ask for any help you may need. Chances are someone has done this repair.

Re-1992 Funlite
 

Thank you everyone. The link that Pat gave me turned out to be a gold mine. I called them regarding my parts needed and they sold me the metal bracket, the pulley and center bolt for the pulley for$53.00 and that included shipping. He said I didn't need to weld it on, he said it can be bolted on.:)