I am sure J&R sales listed in this forum has it. Yes it is the same all over the trailer for this seal.

__________________
Tom
2003 Hi-Lo 17T
2002 Avalanche

Check the previous posts on J&R Repair in Butler, Ohio. They will have the seals you need.

I just received my factory replacement parts. When I heard of Hi-Lo closeing shop, I rushed to order some parts that are used only on hi-lo trailers. Lifting cables, extra cable pulley wheels, door hinges, and newer style bulb seal. The bulb seal measures: O.D. of Bulb is 13/16" , Length of tab is 1" , overall mearsurement is 1 13/16" .

__________________
Les

2006 22ft towlite (replaces 97 21TL)
2006 Toyota tacoma pre-runner 4.0 L V-6 quad cab
w/ 98 chevy Powervision towing mirrors

I hope you are right about our cables may never need to be replaced.11 We have some bad delamination that we are just using the trailer as is.. Maybe some day we,ll be able to upgrade to one with a tip out. We've replaced the ref.and the air conditioner. My husband is a handy sheet metal fabricator/semi retired. We just love the layout and the decor of our HiLo..I understand that HiLo had trouble in the 90's with the wavy fiberglass sides/delamination.

$2.50 a foot per j&r

We had to replace the door seal and the seal on our outside water heater door. We used a roll of foam insulation and this was covered by some lt.blue vinyl upholestery that I had left over from another project. We used screws and some rivits. In a couple of days it will be 70 degrees and I will go where the trailer is parked and take some pictures. Kind of hard to explain. Today it is 45degrees and rather windy and it feels much colder. We have a 90 HiLo classic. I think I have some fabric left that I could send with someone that is going to the rally in June. If you can use the newer bulb seal do this it isn;t all that expensive.

Just ordered the "Bulb Seal" from Hi-lo Parts.
Bulb Seal - The Official HiLo Trailer Parts & Service
This could be a challenge and I hope I'm up to it! The advised that installation instructions are included.

2004 27T

I'm definitely interested in seeing these pics; I'm somewhat concerned about the idea of replacing this seal -

Lloyd - any chance you'd be willing to post the details on the replacement instructions? I'm curious about them. Might already be posted in the library section; haven't looked just yet.