![Reply](https://www.hilotrailerforum.com/images/hilo/buttons/reply.gif) |
|
03-09-2018, 01:37 PM
|
#1
|
Member
Join Date: Jan 2018
Location: Elon NC
Posts: 30
|
Awning on hilo campers, Question
Are the awning fabric standard? Or are they shorter because of the shorter awning arms, and where can you buy them?
Benbar
__________________
|
|
|
03-09-2018, 02:10 PM
|
#2
|
Site Team
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,549
|
I believe they ARE standard. I bought some attachment hardware online about 4 years ago to replace parts of mine that I'd broken. I don't know of a good source for awnings offhand, but I bet an internet search would yield results.
You could also ask JR Repair for help.
__________________
__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew
|
|
|
03-09-2018, 05:31 PM
|
#3
|
Senior Member
Join Date: Mar 2010
Location: Far West Texas
Posts: 1,368
|
Quote:
Originally Posted by bigbar
Are the awning fabric standard? Or are they shorter because of the shorter awning arms, and where can you buy them?
Benbar
|
I went to Camping World and another local RV shop to get a quote. I gave them all the numbers I could find on the assembly. One of them was the magic number. They even knew it was for a Hi-Lo. So, they are most likely specific to our trailers.
__________________
"Ruben"
2404T, 2003 2500HD 4X4 GMC Sierra SLT Crew Cab w/Astro camper shell and 2003 Chevy Tahoe LE 4X2
Far West Texas
|
|
|
03-10-2018, 07:15 AM
|
#4
|
Moderator
Join Date: Feb 2010
Location: NW PA
Posts: 3,386
|
I believe they are shorter in length than a standard travel trailer awning. Look for a tag on the awning material and get the numbers from it. I think the tag is near the top attachment point. But I have a bad memory.
__________________
My Great Wife Joyce
2018 Jayco Jay Flight 21QB
Formerly owned 1705T and 2310H
2012 F150 4X4 SuperCrew EcoBoost w/Leer Cap
Reese WD Strait-Line Hitch
Amateur Radio K3EXU
|
|
|
03-10-2018, 08:53 AM
|
#5
|
Site Team
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,549
|
Rich, what are we talking about? Are you saying the roller is shorter or is it that the length of the fabric on the roller is shorter?
I suspect I was confused in my answer to the OP's question and am sorry if I gave a misleading answer.
Good grief! I just re-read the original post and found I WAS confused! Senior Moment again! How the heck did I miss the word "fabric"? I AM sorry!
- Jack
|
|
|
03-10-2018, 10:08 AM
|
#6
|
Senior Member
Join Date: Oct 2011
Location: Berwick. Pa
Posts: 344
|
From the groove at the top of the camper to the first groove in the roller is 81 inches, 3 1/2 to the second groove, then a 7 inch valance, just went out and measured. Boy is it cold out.
__________________
Cheers
Garyk52
DW Judy
96 24' Hi-Lo Funchaser, (99 Aliner Sofabed Sold 6/9/18)
06 Toyota Tundra SR5 Access Cab 4X4 36,000 miles and counting
|
|
|
03-10-2018, 02:01 PM
|
#7
|
Moderator
Join Date: Feb 2010
Location: NW PA
Posts: 3,386
|
Quote:
Originally Posted by JackandJanet
Rich, what are we talking about? Are you saying the roller is shorter or is it that the length of the fabric on the roller is shorter?
I suspect I was confused in my answer to the OP's question and am sorry if I gave a misleading answer.
Good grief! I just re-read the original post and found I WAS confused! Senior Moment again! How the heck did I miss the word "fabric"? I AM sorry!
- Jack
|
Sorry, I meant the length of the fabric from the mount to the roller when extended. I look at that as the length and the width is the what's front to back on the mount. That is confusing. I guess just one word doesn't really explain that.
__________________
My Great Wife Joyce
2018 Jayco Jay Flight 21QB
Formerly owned 1705T and 2310H
2012 F150 4X4 SuperCrew EcoBoost w/Leer Cap
Reese WD Strait-Line Hitch
Amateur Radio K3EXU
|
|
|
03-10-2018, 02:11 PM
|
#8
|
Site Team
Join Date: Jul 2010
Location: Pine, AZ
Posts: 4,549
|
Not to worry, Rich. I completely misunderstood the original post. *DUH*.
- Jack
|
|
|
03-11-2018, 07:49 AM
|
#9
|
Site Team
Join Date: Feb 2015
Location: SWFL Bonita Springs/Andrews, NC
Posts: 1,264
|
I'm sure the length (from top to roller barrel) is unique to Hi Los. Mine is definitely a replacement and if I FULLY deploy the awning, the support rods come apart. I've measured and found the fabric is about one foot too long.
I've thought about replacing the fabric, but shortening it before install. Tough task, but my Huskie sewing machine can handle it. Bottom line for me, don't fully deploy!
__________________
Treeclimber
2703 Tow Lite
2002 Escalade
Bonita Springs, Fl. &
Andrews, NC
|
|
|
03-11-2018, 08:38 AM
|
#10
|
Member
Join Date: Jan 2018
Location: Elon NC
Posts: 30
|
Thanks for all the responses, Now i know the Awning front to back extended is 6ft 9 inches and a 7inch valance.
Thanks Bigbar
|
|
|
04-13-2018, 08:42 PM
|
#11
|
Member
Join Date: Sep 2010
Location: Broadlands, IL
Posts: 49
|
I replaced my awning a few years ago with fabric only from an ebay seller. The fabric was regular length but I chose to leave it as such because, when the 'always exposed' section wears (as they all do), I'll cut the excess at that time & hopefully, double the life of my awning.
---------------------------
Towlite 2204
Dodge Ram 1500
|
|
|
04-14-2018, 02:24 PM
|
#12
|
Member
Join Date: Jan 2018
Location: Elon NC
Posts: 30
|
Quote:
Originally Posted by Qwerty
I replaced my awning a few years ago with fabric only from an ebay seller. The fabric was regular length but I chose to leave it as such because, when the 'always exposed' section wears (as they all do), I'll cut the excess at that time & hopefully, double the life of my awning.
---------------------------
Towlite 2204
Dodge Ram 1500
|
Hey ! Good ideal. ole dogs can learn new tricks.
Bigbar
|
|
|
04-14-2018, 09:09 PM
|
#13
|
Member
Join Date: Sep 2010
Location: Broadlands, IL
Posts: 49
|
A caveat, Bigbar. If you take this route, your awning will (just about) extend fully but I don't recommend it as the bottom awning supports may bend inwards as mine did. So, if you're not fussed about the fabric's fringe being visible, just extend to the Hi-Lo length.
---------------------------
Towlite 2204
Dodge Ram 1500
|
|
|
04-15-2018, 09:32 AM
|
#14
|
Member
Join Date: Jan 2018
Location: Elon NC
Posts: 30
|
Quote:
Originally Posted by Qwerty
A caveat, Bigbar. If you take this route, your awning will (just about) extend fully but I don't recommend it as the bottom awning supports may bend inwards as mine did. So, if you're not fussed about the fabric's fringe being visible, just extend to the Hi-Lo length.
---------------------------
Towlite 2204
Dodge Ram 1500
|
Thanks Querty ! I think i'll mark my main rafter arms and fabric just to remind me not to extend the awning to far. I'll be cutting off a part of my awing tube because it's bend in on on side also i can remount my brackets and arms in a different location. The awning had a tree jump out in front of it in a campground by the previous owner. LOL Thanks bigbar
|
|
|
04-15-2018, 09:01 PM
|
#15
|
Senior Member
Join Date: Mar 2010
Location: Niagara Falls,NY
Posts: 4,075
|
Awning repairs.
We got caught in a wind storm and it bent the arm of our carefree awning. I had the exploded parts for Carefree. They had the parts I needed. I called them a second time and they sent some small hardware N/C. Youtube has a video on awning repair. When we had our walls torn apart we were asble to reinforce where the awning bracked goes into the exterior side of the HiLo. Apiece of sttel was bolted in. That way the awning bracket had a good "stud" area to be firmly attached too.
|
|
|
04-15-2018, 09:25 PM
|
#16
|
Member
Join Date: Jan 2018
Location: Elon NC
Posts: 30
|
Quote:
Originally Posted by sam
We got caught in a wind storm and it bent the arm of our carefree awning. I had the exploded parts for Carefree. They had the parts I needed. I called them a second time and they sent some small hardware N/C. Youtube has a video on awning repair. When we had our walls torn apart we were asble to reinforce where the awning bracked goes into the exterior side of the HiLo. Apiece of sttel was bolted in. That way the awning bracket had a good "stud" area to be firmly attached too.
|
Lot of good information being passed on!
Thanks, bigbar 97 towlite
|
|
|
04-15-2018, 09:29 PM
|
#17
|
Member
Join Date: Sep 2010
Location: Broadlands, IL
Posts: 49
|
Sam, our front top bracket has only one screw (came to us from the original owners that way, the screw was sheared). I often worry that it's gonna go one windy day. Looks like I should do the same.
|
|
|
04-15-2018, 09:48 PM
|
#18
|
Member
Join Date: Jan 2018
Location: Elon NC
Posts: 30
|
Carefree Awning !
Hey Sam, i didn't know carefree had made awnings for Hilo's. I thought they were all A&E by Dometic. Have you got part numbers you could share. I don't know the difference, i'm thinking the Dometic is heavier gauge metal and the roller tube is bigger in dia.
bigbar
|
|
|
04-16-2018, 08:50 PM
|
#19
|
Senior Member
Join Date: Mar 2010
Location: Niagara Falls,NY
Posts: 4,075
|
My awning for 1990 25ft. Classic.
I think different years had different awning manufactures. In later years our dealer told us HiLo bought the toilet,awning,AC as a package deal from Dometic. Supply companies merged. I can't get into my HiLo right now as it is raining/snowing like cats and dogs. Take a picture of your HiLo awning and hopefully someone can identify the brand. Here is a post by Sam Shields retired HiLo service advisor. Re ataching awning bracket 7-31-2010 . This tells you how to make a sturdier repair.
|
|
|
04-16-2018, 09:18 PM
|
#20
|
Member
Join Date: Jan 2018
Location: Elon NC
Posts: 30
|
Quote:
Originally Posted by sam
I think different years had different awning manufactures. In later years our dealer told us HiLo bought the toilet,awning,AC as a package deal from Dometic. Supply companies merged. I can't get into my HiLo right now as it is raining/snowing like cats and dogs. Take a picture of your HiLo awning and hopefully someone can identify the brand. Here is a post by Sam Shields retired HiLo service advisor. Re ataching awning bracket 7-31-2010 . This tells you how to make a sturdier repair.
|
Thanks Sam, I know mine is a dometic by A&E. I wanted to put a crank out up grade on mine but the Dometic cost about 250 dollars compare to the Carefree at about 45 dollars crank out head only. The Carefree won;t fit the Dometic. So, if i can buy the whole thing, awning complete with fabric by Carefree thats what i would do if it's cheaper! Ebay has some good deals. But in order to check prices i need pert numbers. Bigbar
__________________
|
|
|
![Reply](https://www.hilotrailerforum.com/images/hilo/buttons/reply.gif) |
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|