Would anyone know where I can purchase a new pressure relief valve for my 2007 Hilo monarch hydraulic lift

kindisco.com

Tks Pops for the info. I think I’ve figured out the problem.

Pumps connected and running tks to Tony at Butchers Hyd. That’s done now I find that the lift cylinder is bad and not one rv repair shop will tell me how much to remove/repair and reinstall, about ready to throw in the towel.

I am positive others have done this repair. It is surely posted how to remove and then put back.

There's a thread on cylinder removal that was posted by Treeclimber, It's here: https://www.hilotrailerforum.com/f22...cylinder-5818/

I wouldn't trust any RV shop to do this work. They don't know how and they'll likely do a crappy job. Get the cylinder out yourself and take it to a shop that does hydraulic work for a rebuild. Then, reinstall it.

We owners can fix anything that's wrong in our HiLos better than any commercial shop. When I get too feeble to do the work myself, that's the time to quit camping. So far, at 83, I'm still able to do the work, so I still camp.

- Jack

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew

Thanks for the response Treeclimber. I was a millwright many years ago, so I understand the work but at 81 it’s not anything I’m anxious to do. I agree with you though, when I just can’t do the work on it it’s time to sell. It’s gotta be done so the tools will come out.