Is there an easy way to disable the onboard battery charger when hooked to a generator?

My Cummins Onan QD 7.5 is getting a code 27 and one of the possible causes is interference with two 12 volt charging sources.

One source is the generators onboard charger

The second source is the HI-LOs charger

It's not exactly easy, but you could pull one of the two 30A fuses in the converter. On my Elixer converter if one of these is blown, it will stop the battery from being charged.

Alternatively, you could disconnect the converter charging wire from one of the two 30A circuit breakers in the battery box. That's probably easier than pulling a fuse. Here's how mine is wired, your's could be different: https://www.hilotrailerforum.com/att...ary-wiring.jpg It's the #8 black wire on the extreme right side in the diagram.

You could also put a simple ON/OFF switch in that wire too, up next to the circuit breaker, to simplify cutting it off.

Beyond that, I don't know of any way to disable the converter battery charger when the converter is getting power from a generator. Disconnecting the battery would also stop charging, but it would kill all your DC equipment too.

- Jack

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew