I am changing my 30 amp power converter from the B-W manufacturer to a IOTA DLS-30 Series m !!?? But my old one has panel with fuses on it that run to the water pump & hydraulic motor ?? How to switch the panel over to new one

Sandos, I moved your post to its own thread rather than leaving it in a 5-year old thread that was more about concerns with the interaction of a converter with propane systems.

The fuse panel you see is the DC distribution panel. Your new converter has DC output wires that would go to this panel in much the same way the old one connected to it. I recently replaced my Elixir converter with a new one from Progressive Dynamics and my thread MAY help you a bit, even though the systems are not the same brand. You can read through it here: https://www.hilotrailerforum.com/f28...lacement-7659/

It appears that IOTA has some technical support too, so don't hesitate to talk to them about how to hook up your new converter.

- Jack

__________________
Hi-Lo 1707T - Tire Minder TPMS on Tow Vehicle and Trailer, 300W Solar Battery Charger, Equal-i-zer WDH, Progressive Dynamics Converter, Fan-Tastic Fan, LiFePO4 battery 12V DC Electrical System
2014 F150 Platinum 4x4 3.5L EcoBoost SCrew