|
01-20-2014, 11:02 PM
|
#1
|
Member
Join Date: Jan 2013
Location: Houston, TX
Posts: 72
|
F250 4x4 Trailer Hitch Drop
My son-in-law and daughter own a 1989 22' Funchaser. The tow vehicle has been my '07 Tundra 4x2. The receiver hitch has a 1" drop on it and when my Tundra pulled Miss Daisy she was pretty level.
My SIL purchased a '07 F250 4x4 and it's stock.....no lift. He used the same hitch receiver and I noticed the front of the trailer is higher than the back.....not significantly, but enough to notice.
We figure he needs a receiver with a 2"-2 1/2" drop on it. What's the best way to figure out which one he needs?
Do we connect the trailer to his truck and use a level below the trailer tongue to get to a level position and measure the distance?
As you can tell we are novices (not kidding). LOL
__________________
|
|
|
01-20-2014, 11:42 PM
|
#2
|
Senior Member
Join Date: Mar 2010
Location: Niagara Falls,NY
Posts: 4,078
|
getting correct set up on hitch
Take your truck and trailer to an RV place. They will be able to set you up correctly for towing. They should have the drop that you need. Our HiLo dealer did this for us. It still was tricky and they had to make an adjustment with our f250 in the second year of towing. Perhaps you can find a utube tutorial on this. It is a good thing to be set up level when towing. We have all seen less than level rigs being towed down the highway.
__________________
|
|
|
01-21-2014, 07:03 AM
|
#3
|
Senior Member
Join Date: Aug 2010
Location: Quakertown, PA
Posts: 1,074
|
For safe towing you should be using a Weight Distribution Hitch, the 2" square ball mount is adjustable, so that the trailer sets level.
http://www.hilotrailerforum.com/f63/...wd-hitch-1077/
__________________
Rich
------------------------------------
(215TL) - 1995 21' TowLite
(2209T) - 2009 22' TowLite
(2510 ) - 2010 25'
|
|
|
01-21-2014, 11:28 AM
|
#4
|
Senior Member
Join Date: Dec 2012
Location: Upper left corner
Posts: 531
|
I would not say that a WDH is necessary to be safe. Towing a 22' Funchaser with a 3/4 ton truck is probably OK without a Weight Distributing Hitch (WDH).
Here's a good guide to choosing the correct height ball mount:
Choosing the Correct Ball Mount | etrailer.com. One thing that the article does not consider is the sag on the tow vehicle as a result of the trailer being hitched. You can approximate this by measuring the hitch height with your current ball mount before and after hitching the trailer up. The amount of sag can be added to the ball height computation.
Make sure that you take a couple of other things into consideration: 1- Hitch capacity - this is often on a plate or sticker on the hitch. Make sure that it can handle the gross weight weight of the trailer (I believe that it is 5000-5200 lb) and the tongue weight (10%-15% of the trailer weight). Often there are two capacities listed depending on whether a WDH is used or not, 2- Hitch ball capacity - the ball rating should be no less than the trailer gross weight. Ball capacity is usually based on the diameter of the ball shank, and not the diameter of the ball. The capacity should be clearly stamped on the ball.
__________________
Raul
2408T
2010 Nissan Frontier, 4x4, Crew Cab
|
|
|
01-21-2014, 04:29 PM
|
#5
|
Senior Member
Join Date: Mar 2010
Location: Far West Texas
Posts: 1,370
|
Owners manual recommends a WDH. I've always heard that the rule of thumb is 17' and longer, you should use a WDH.
__________________
"Ruben"
2404T, 2003 2500HD 4X4 GMC Sierra SLT Crew Cab w/Astro camper shell and 2003 Chevy Tahoe LE 4X2
Far West Texas
|
|
|
01-21-2014, 05:10 PM
|
#6
|
Senior Member
Join Date: Dec 2012
Location: Upper left corner
Posts: 531
|
A WDH is certainly a good idea but not necessary if the tow vehicle is level once hitched up and none of the weight ratings are exceeded. For example, my neighbor has a business that relies on a number of 24' trailers that weigh around 5000 Lb. He and his staff have been have been towing these type of trailers with 3/4 ton pickups for over 15 years without WDHs. They have never had any issues.
__________________
Raul
2408T
2010 Nissan Frontier, 4x4, Crew Cab
|
|
|
01-29-2014, 09:55 AM
|
#7
|
Senior Member
Join Date: Oct 2013
Location: Memphis
Posts: 276
|
I agree with Norton
I agree with Norton on this issue. A 17 foot trailer simply is too small to require a WDH. We tow a 35 foot Fountain Lightening all around the southeast with an F-250 V-10 and have never even seen another boat of this size or weight (12K with trailer) being towed with a WDH. Rule of thumb is tongue weight is about 10%of weight of item being towed. I'm curious, how much sag do you think would come from hooking up a 17 foot trailer on the average vehicle? Let's say tongue weight of about 3-400# or so......no need of a WDH. It certainly is an interesting topic, and I enjoy all the answers.
__________________
Jim in Memphis
Wife of 45 years is Brenda
Recently sold our 1997 24' Classic
2014 Ford F-350 6.7 Diesel Crew Cab
|
|
|
02-06-2014, 10:36 AM
|
#8
|
Senior Member
Join Date: Feb 2012
Location: Wisconsin
Posts: 1,256
|
Im curious. Can you rig anti-sway control without a WDH? I get a 3/4 or, even, 1 ton would not need it for sag but I would think trailer sway would still come into play and you might want to compensate for it.
__________________
2201 TL
2010 Nissan Titan king cab SE
4x4
|
|
|
02-06-2014, 11:36 AM
|
#9
|
Senior Member
Join Date: Dec 2012
Location: Upper left corner
Posts: 531
|
Quote:
Originally Posted by hilltool
Im curious. Can you rig anti-sway control without a WDH? I get a 3/4 or, even, 1 ton would not need it for sag but I would think trailer sway would still come into play and you might want to compensate for it.
|
Yes, you can use a friction sway device like this one: Pro Series Friction Sway Control - Value Sway Control 83660
__________________
__________________
Raul
2408T
2010 Nissan Frontier, 4x4, Crew Cab
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|